PowerHC: Non Linear Normalization of Distances for Advanced Nearest Neighbor Classification

Manuele Bicego, Mauricio Orozco-Alzate

Responsive image

Auto-TLDR; Non linear scaling of distances for advanced nearest neighbor classification

Slides Poster

In this paper we investigate the exploitation of non linear scaling of distances for advanced nearest neighbor classification. Starting from the recently found relation between the Hypersphere Classifier (HC) and the Adaptive Nearest Neighbor rule (ANN), here we propose PowerHC, an improved version of HC in which distances are normalized using a non linear mapping; non linear scaling of data, whose usefulness for feature spaces has been already assessed, has been hardly investigated for distances. A thorough experimental evaluation, involving 24 datasets and a challenging real world scenario of seismic signal classification, confirms the suitability of the proposed approach.

Similar papers

A Cheaper Rectified-Nearest-Feature-Line-Segment Classifier Based on Safe Points

Mauricio Orozco-Alzate, Manuele Bicego

Responsive image

Auto-TLDR; Rectified Nearest Feature Line Segment Segment Classifier

Slides Poster Similar

The Rectified Nearest Feature Line Segment (RN-FLS) classifier is an improved version of the Nearest Feature Line (NFL) classification rule. RNFLS corrects two drawbacks of NFL, namely the interpolation and extrapolation inaccuracies, by applying two consecutive processes - segmentation and rectification - to the initial set of feature lines. The main drawbacks of this technique, occurring in both training and test phases, are the high computational cost of the rectification procedure and the exponential explosion of the number of lines. We propose a cheaper version of RNFLS, based on a characterization of the points that should form good lines. The characterization relies on a recent neighborhood-based principle that categorizes objects into four types: safe, borderline, rare and outliers, depending on the position of each point with respect to the other classes. The proposed approach represents a variant of RNFLS in the sense that it only considers lines between safe points. This allows a drastic reduction in the computational burden imposed by RNFLS. We carried out an empirical and thorough analysis based on different public data sets, showing that our proposed approach, in general, is not significantly different from RNFLS, but cheaper since the consideration of likely irrelevant feature line segments is avoided.

On Learning Random Forests for Random Forest Clustering

Manuele Bicego, Francisco Escolano

Responsive image

Auto-TLDR; Learning Random Forests for Clustering

Slides Poster Similar

In this paper we study the poorly investigated problem of learning Random Forests for distance-based Random Forest clustering. We studied both classic schemes as well as alternative approaches, novel in this context. In particular, we investigated the suitability of Gaussian Density Forests, Random Forests specifically designed for density estimation. Further, we introduce a novel variant of Random Forest, based on an effective non parametric by-pass estimator of the Renyi entropy, which can be useful when the parametric assumption is too strict. An empirical evaluation involving different datasets and different RF-clustering strategies confirms that the learning step is crucial for RF-clustering. We also present a set of practical guidelines useful to determine the most suitable variant of RF-clustering according to the problem under examination.

A Novel Random Forest Dissimilarity Measure for Multi-View Learning

Hongliu Cao, Simon Bernard, Robert Sabourin, Laurent Heutte

Responsive image

Auto-TLDR; Multi-view Learning with Random Forest Relation Measure and Instance Hardness

Slides Poster Similar

Multi-view learning is a learning task in which data is described by several concurrent representations. Its main challenge is most often to exploit the complementarities between these representations to help solve a classification/regression task. This is a challenge that can be met nowadays if there is a large amount of data available for learning. However, this is not necessarily true for all real-world problems, where data are sometimes scarce (e.g. problems related to the medical environment). In these situations, an effective strategy is to use intermediate representations based on the dissimilarities between instances. This work presents new ways of constructing these dissimilarity representations, learning them from data with Random Forest classifiers. More precisely, two methods are proposed, which modify the Random Forest proximity measure, to adapt it to the context of High Dimension Low Sample Size (HDLSS) multi-view classification problems. The second method, based on an Instance Hardness measurement, is significantly more accurate than other state-of-the-art measurements including the original RF Proximity measurement and the Large Margin Nearest Neighbor (LMNN) metric learning measurement.

Categorizing the Feature Space for Two-Class Imbalance Learning

Rosa Sicilia, Ermanno Cordelli, Paolo Soda

Responsive image

Auto-TLDR; Efficient Ensemble of Classifiers for Minority Class Inference

Slides Poster Similar

Class imbalance limits the performance of most learning algorithms, resulting in a low recognition rate for samples belonging to the minority class. Although there are different strategies to address this problem, methods that generate ensemble of classifiers have proven to be effective in several applications. This paper presents a new strategy to construct the training set of each classifier in the ensemble by exploiting information in the feature space that can give rise to unreliable classifications, which are determined by a novel algorithm here introduced. The performance of our proposal is compared against multiple standard ensemble approaches on 25 publicly available datasets, showing promising results.

Classifier Pool Generation Based on a Two-Level Diversity Approach

Marcos Monteiro, Alceu Britto, Jean Paul Barddal, Luiz Oliveira, Robert Sabourin

Responsive image

Auto-TLDR; Diversity-Based Pool Generation with Dynamic Classifier Selection and Dynamic Ensemble Selection

Slides Poster Similar

This paper describes a classifier pool generation method guided by the diversity estimated on the data complexity and classifier decisions. First, the behavior of complexity measures is assessed by considering several subsamples of the dataset. The complexity measures with high variability across the subsamples are selected for posterior pool adaptation, where an evolutionary algorithm optimizes diversity in both complexity and decision spaces. A robust experimental protocol with 28 datasets and 20 replications is used to evaluate the proposed method. Results show significant accuracy improvements in 69.4\% of the experiments when Dynamic Classifier Selection and Dynamic Ensemble Selection methods are applied.

Encoding Brain Networks through Geodesic Clustering of Functional Connectivity for Multiple Sclerosis Classification

Muhammad Abubakar Yamin, Valsasina Paola, Michael Dayan, Sebastiano Vascon, Tessadori Jacopo, Filippi Massimo, Vittorio Murino, A Rocca Maria, Diego Sona

Responsive image

Auto-TLDR; Geodesic Clustering of Connectivity Matrices for Multiple Sclerosis Classification

Slides Poster Similar

An important task in brain connectivity research is the classification of patients from healthy subjects. In this work, we present a two-step mathematical framework allowing to discriminate between two groups of people with an application to multiple sclerosis. The proposed approach exploits the properties of the connectivity matrices determined using the covariances between signals of a fixed set of brain areas. These positive semi-definite matrices lay on a Riemannian manifold, allowing to use a geodesic distance defined on this space. In order to generate a vector representation useful for classification purpose, but still preserving the network structures, we encoded the data exploiting the network attractors determined by a geodesic clustering of connectivity matrices. Then clustering centroids were used as a dictionary allowing to encode subject’s connectivity matrices as a vector of geodesic distances. A Linear Support Vector Machine was then used to perform classification between subjects. To demonstrate the advantage of using geodesic metrics in this framework, we conducted the same analysis using Euclidean metric. Experimental results validate the fact that employing geodesic metric in this framework leads to a higher classification performance, whereas with Euclidean metric performance was suboptimal.

MD-kNN: An Instance-Based Approach for Multi-Dimensional Classification

Bin-Bin Jia, Min-Ling Zhang

Responsive image

Auto-TLDR; MD-kNN: Adapting Instance-based Techniques for Multi-dimensional Classification

Slides Poster Similar

Multi-dimensional classification (MDC) deals with the problem where each instance is associated with multiple class variables, each of which corresponds to a specific class space. One of the mainstream solutions for MDC is to adapt traditional machine learning techniques to deal with MDC data. In this paper, a first attempt towards adapting instance-based techniques for MDC is investigated, and a new approach named MD-kNN is proposed. Specifically, MD-kNN identifies unseen instance's k nearest neighbors and obtains its corresponding kNN counting statistics for each class space, based on which maximum a posteriori (MAP) inference is made for each pair of class spaces. After that, the class label w.r.t. each class space is determined by synergizing predictions from the learned classifiers via consulting empirical kNN accuracy. Comparative studies over ten benchmark data sets clearly validate MD-kNN's effectiveness.

A Hybrid Metric Based on Persistent Homology and Its Application to Signal Classification

Austin Lawson, Yu-Min Chung, William Cruse

Responsive image

Auto-TLDR; Topological Data Analysis with Persistence Curves

Poster Similar

Topological Data Analysis (TDA) is a rising field in machine learning. TDA considers the shape of data set. Persistence diagrams, one of main tools in TDA, store topological information about the data. Persistence curves, a recently developed framework, provides a canonical and flexible way to encode the information presented in persistence diagrams into vectors. Based on persistence curves, we (1) provide new sets of features for time series, (2) prove that these features are robust to noise, (3) propose a hybrid metric that takes both geometric and topological information of the time series into account. Finally, we apply these metrics to the UCR Time Series Classification Archive. These empirical results show that our metrics perform better than the relevant benchmark in most cases.

Mean Decision Rules Method with Smart Sampling for Fast Large-Scale Binary SVM Classification

Alexandra Makarova, Mikhail Kurbakov, Valentina Sulimova

Responsive image

Auto-TLDR; Improving Mean Decision Rule for Large-Scale Binary SVM Problems

Slides Poster Similar

This paper relies on the Mean Decision Rule (MDR) method for solving large-scale binary SVM problems. It consists in taking small random samples of the full dataset and separate training for each of them with consecutive averaging the respective individual decision rules to obtain a final one. This paper proposes two new approaches to improve it. The first proposed approach is a new sampling technique that exploits SVM and MDR properties to fast form so called smart samples by selecting only the objects, that are candidates to be the support ones. The proposed technique essentially increases MDR convergence and allows to reach the highest quality in less time. In the case of kernel-based MDR (KMDR) the proposed sampling technique allows additionally to reduce the number of support objects in the final decision rule and, as a result, to decrease the recognition time. The second proposed approach is a new data strategy to accelerate random access to large datasets stored in the traditional libsvm format. The proposed strategy allows to quickly extract random subsets of objects from a file and load them into RAM, and is it also suitable for any sampling-based methods, including stochastic gradient methods. Joint using of the proposed approaches with (K)MDR allows to obtain the best (or near the best) decision of large-scale binary SVM problems faster, compared to the existing SVM solvers.

A Close Look at Deep Learning with Small Data

Lorenzo Brigato, Luca Iocchi

Responsive image

Auto-TLDR; Low-Complex Neural Networks for Small Data Conditions

Slides Poster Similar

In this work, we perform a wide variety of experiments with different Deep Learning architectures in small data conditions. We show that model complexity is a critical factor when only a few samples per class are available. Differently from the literature, we improve the state of the art using low complexity models. We show that standard convolutional neural networks with relatively few parameters are effective in this scenario. In many of our experiments, low complexity models outperform state-of-the-art architectures. Moreover, we propose a novel network that uses an unsupervised loss to regularize its training. Such architecture either improves the results either performs comparably well to low capacity networks. Surprisingly, experiments show that the dynamic data augmentation pipeline is not beneficial in this particular domain. Statically augmenting the dataset might be a promising research direction while dropout maintains its role as a good regularizer.

Supervised Classification Using Graph-Based Space Partitioning for Multiclass Problems

Nicola Yanev, Ventzeslav Valev, Adam Krzyzak, Karima Ben Suliman

Responsive image

Auto-TLDR; Box Classifier for Multiclass Classification

Slides Poster Similar

We introduce and investigate in multiclass setting an efficient classifier which partitions the training data by means of multidimensional parallelepipeds called boxes. We show that multiclass classification problem at hand can be solved by integrating the heuristic minimum clique cover approach and the k-nearest neighbor rule. Our algorithm is motivated an algorithm for partitioning a graph into a minimal number of maximal. The main advantage of the new classifier called Box classifier is that it optimally utilizes the geometrical structure of the training set by decomposing the l-class problem (l > 2) into l binary classification problems. We discuss computational complexity of the proposed Box classifier. The extensive experiments performed on the simulated and real data for binary and multiclass problems show that in almost all cases the Box classifier performs significantly better than k-NN, SVM and decision trees.

An Invariance-Guided Stability Criterion for Time Series Clustering Validation

Florent Forest, Alex Mourer, Mustapha Lebbah, Hanane Azzag, Jérôme Lacaille

Responsive image

Auto-TLDR; An invariance-guided method for clustering model selection in time series data

Slides Poster Similar

Time series clustering is a challenging task due to the specificities of this type of data. Temporal correlation and invariance to transformations such as shifting, warping or noise prevent the use of standard data mining methods. Time series clustering has been mostly studied under the angle of finding efficient algorithms and distance metrics adapted to the specific nature of time series data. Much less attention has been devoted to the general problem of model selection. Clustering stability has emerged as a universal and model-agnostic principle for clustering model selection. This principle can be stated as follows: an algorithm should find a structure in the data that is resilient to perturbation by sampling or noise. We propose to apply stability analysis to time series by leveraging prior knowledge on the nature and invariances of the data. These invariances determine the perturbation process used to assess stability. Based on a recently introduced criterion combining between-cluster and within-cluster stability, we propose an invariance-guided method for model selection, applicable to a wide range of clustering algorithms. Experiments conducted on artificial and benchmark data sets demonstrate the ability of our criterion to discover structure and select the correct number of clusters, whenever data invariances are known beforehand.

Automatic Classification of Human Granulosa Cells in Assisted Reproductive Technology Using Vibrational Spectroscopy Imaging

Marina Paolanti, Emanuele Frontoni, Giorgia Gioacchini, Giorgini Elisabetta, Notarstefano Valentina, Zacà Carlotta, Carnevali Oliana, Andrea Borini, Marco Mameli

Responsive image

Auto-TLDR; Predicting Oocyte Quality in Assisted Reproductive Technology Using Machine Learning Techniques

Slides Poster Similar

In the field of reproductive technology, the biochemical composition of female gametes has been successfully investigated with the use of vibrational spectroscopy. Currently, in assistive reproductive technology (ART), there are no shared criteria for the choice of oocyte, and automatic classification methods for the best quality oocytes have not yet been applied. In this paper, considering the lack of criteria in Assisted Reproductive Technology (ART), we use Machine Learning (ML) techniques to predict oocyte quality for a successful pregnancy. To improve the chances of successful implantation and minimize any complications during the pregnancy, Fourier transform infrared microspectroscopy (FTIRM) analysis has been applied on granulosa cells (GCs) collected along with the oocytes during oocyte aspiration, as it is routinely done in ART, and specific spectral biomarkers were selected by multivariate statistical analysis. A proprietary biological reference dataset (BRD) was successfully collected to predict the best oocyte for a successful pregnancy. Personal health information are stored, maintained and backed up using a cloud computing service. Using a user-friendly interface, the user will evaluate whether or not the selected oocyte will have a positive result. This interface includes a dashboard for retrospective analysis, reporting, real-time processing, and statistical analysis. The experimental results are promising and confirm the efficiency of the method in terms of classification metrics: precision, recall, and F1-score (F1) measures.

Nearest Neighbor Classification Based on Activation Space of Convolutional Neural Network

Xinbo Ju, Shuo Shao, Huan Long, Weizhe Wang

Responsive image

Auto-TLDR; Convolutional Neural Network with Convex Hull Based Classifier

Poster Similar

In this paper, we propose a new image classifier based on the incorporation of the nearest neighbor algorithm and the activation space of convolutional neural network. The classifier has been successfully used on some state-of-the-art models and further improve their performance. Main technique tools we used are convex hull based classification and its acceleration. We find that 1) in several cases, the classifier can reach higher accuracy than original CNN; 2) by sampling, the classifier can work more efficiently; 3) centroid of each convex hull shows surprising ability in classification. Most of the work has strong geometry meanings, which helps us have a new understanding about convolutional layers.

Time Series Data Augmentation for Neural Networks by Time Warping with a Discriminative Teacher

Brian Kenji Iwana, Seiichi Uchida

Responsive image

Auto-TLDR; Guided Warping for Time Series Data Augmentation

Slides Poster Similar

Neural networks have become a powerful tool in pattern recognition and part of their success is due to generalization from using large datasets. However, unlike other domains, time series classification datasets are often small. In order to address this problem, we propose a novel time series data augmentation called guided warping. While many data augmentation methods are based on random transformations, guided warping exploits the element alignment properties of Dynamic Time Warping (DTW) and shapeDTW, a high-level DTW method based on shape descriptors, to deterministically warp sample patterns. In this way, the time series are mixed by warping the features of a sample pattern to match the time steps of a reference pattern. Furthermore, we introduce a discriminative teacher in order to serve as a directed reference for the guided warping. We evaluate the method on all 85 datasets in the 2015 UCR Time Series Archive with a deep convolutional neural network (CNN) and a recurrent neural network (RNN). The code with an easy to use implementation can be found at https://github.com/uchidalab/time_series_augmentation.

A Novel Adaptive Minority Oversampling Technique for Improved Classification in Data Imbalanced Scenarios

Ayush Tripathi, Rupayan Chakraborty, Sunil Kumar Kopparapu

Responsive image

Auto-TLDR; Synthetic Minority OverSampling Technique for Imbalanced Data

Slides Poster Similar

Imbalance in the proportion of training samples belonging to different classes often poses performance degradation of conventional classifiers. This is primarily due to the tendency of the classifier to be biased towards the majority classes in the imbalanced dataset. In this paper, we propose a novel three step technique to address imbalanced data. As a first step we significantly oversample the minority class distribution by employing the traditional Synthetic Minority OverSampling Technique (SMOTE) algorithm using the neighborhood of the minority class samples and in the next step we partition the generated samples using a Gaussian-Mixture Model based clustering algorithm. In the final step synthetic data samples are chosen based on the weight associated with the cluster, the weight itself being determined by the distribution of the majority class samples. Extensive experiments on several standard datasets from diverse domains show the usefulness of the proposed technique in comparison with the original SMOTE and its state-of-the-art variants algorithms.

How to Define a Rejection Class Based on Model Learning?

Sarah Laroui, Xavier Descombes, Aurelia Vernay, Florent Villiers, Francois Villalba, Eric Debreuve

Responsive image

Auto-TLDR; An innovative learning strategy for supervised classification that is able, by design, to reject a sample as not belonging to any of the known classes

Slides Poster Similar

In supervised classification, the learning process typically trains a classifier to optimize the accuracy of classifying data into the classes that appear in the learning set, and only them. While this framework fits many use cases, there are situations where the learning process is knowingly performed using a learning set that only represents the data that have been observed so far among a virtually unconstrained variety of possible samples. It is then crucial to define a classifier which has the ability to reject a sample, i.e., to classify it into a rejection class that has not been yet defined. Although obvious solutions can add this ability a posteriori to a classifier that has been learned classically, a better approach seems to directly account for this requirement in the classifier design. In this paper, we propose an innovative learning strategy for supervised classification that is able, by design, to reject a sample as not belonging to any of the known classes. For that, we rely on modeling each class as the combination of a probability density function (PDF) and a threshold that is computed with respect to the other classes. Several alternatives are proposed and compared in this framework. A comparison with straightforward approaches is also provided.

Proximity Isolation Forests

Antonella Mensi, Manuele Bicego, David Tax

Responsive image

Auto-TLDR; Proximity Isolation Forests for Non-vectorial Data

Slides Poster Similar

Isolation Forests are a very successful approach for solving outlier detection tasks. Isolation Forests are based on classical Random Forest classifiers that require feature vectors as input. There are many situations where vectorial data is not readily available, for instance when dealing with input sequences or strings. In these situations, one can extract higher level characteristics from the input, which is typically hard and often loses valuable information. An alternative is to define a proximity between the input objects, which can be more intuitive. In this paper we propose the Proximity Isolation Forests that extend the Isolation Forests to non-vectorial data. The introduced methodology has been thoroughly evaluated on 8 different problems and it achieves very good results also when compared to other techniques.

Feature Extraction by Joint Robust Discriminant Analysis and Inter-Class Sparsity

Fadi Dornaika, Ahmad Khoder

Responsive image

Auto-TLDR; Robust Discriminant Analysis with Feature Selection and Inter-class Sparsity (RDA_FSIS)

Slides Similar

Feature extraction methods have been successfully applied to many real-world applications. The classical Linear Discriminant Analysis (LDA) and its variants are widely used as feature extraction methods. Although they have been used for different classification tasks, these methods have some shortcomings. The main one is that the projection axes obtained are not informative about the relevance of original features. In this paper, we propose a linear embedding method that merges two interesting properties: Robust LDA and inter-class sparsity. Furthermore, the targeted projection transformation focuses on the most discriminant original features. The proposed method is called Robust Discriminant Analysis with Feature Selection and Inter-class Sparsity (RDA_FSIS). Two kinds of sparsity are explicitly included in the proposed model. The first kind is obtained by imposing the $\ell_{2,1}$ constraint on the projection matrix in order to perform feature ranking. The second kind is obtained by imposing the inter-class sparsity constraint used for getting a common sparsity structure in each class. Comprehensive experiments on five real-world image datasets demonstrate the effectiveness and advantages of our framework over existing linear methods.

Deep Transformation Models: Tackling Complex Regression Problems with Neural Network Based Transformation Models

Beate Sick, Torsten Hothorn, Oliver Dürr

Responsive image

Auto-TLDR; A Deep Transformation Model for Probabilistic Regression

Slides Poster Similar

We present a deep transformation model for probabilistic regression. Deep learning is known for outstandingly accurate predictions on complex data but in regression tasks it is predominantly used to just predict a single number. This ignores the non-deterministic character of most tasks. Especially if crucial decisions are based on the predictions, like in medical applications, it is essential to quantify the prediction uncertainty. The presented deep learning transformation model estimates the whole conditional probability distribution, which is the most thorough way to capture uncertainty about the outcome. We combine ideas from a statistical transformation model (most likely transformation) with recent transformation models from deep learning (normalizing flows) to predict complex outcome distributions. The core of the method is a parameterized transformation function which can be trained with the usual maximum likelihood framework using gradient descent. The method can be combined with existing deep learning architectures. For small machine learning benchmark datasets, we report state of the art performance for most dataset and partly even outperform it. Our method works for complex input data, which we demonstrate by employing a CNN architecture on image data.

Using Meta Labels for the Training of Weighting Models in a Sample-Specific Late Fusion Classification Architecture

Peter Bellmann, Patrick Thiam, Friedhelm Schwenker

Responsive image

Auto-TLDR; A Late Fusion Architecture for Multiple Classifier Systems

Slides Poster Similar

The performance of multiple classifier systems can be significantly improved by the use of intelligent classifier combination approaches. In this study, we introduce a novel late fusion architecture, which can be interpreted as a combination of the well-known mixture of experts and stacked generalization methods. Our proposed method aggregates the outputs of classification models and corresponding sample-specific weighting models. A special feature of our proposed architecture is that each weighting model is trained on an individual set of meta labels. Using individual sets of meta labels allows each weighting model to separate regions, on which the predictions of the corresponding classification model can be associated to an estimated confidence value. We test our proposed architecture on a set of publicly available databases, including different benchmark data sets. The experimental evaluation shows the effectiveness and potential of our proposed method. Moreover, we discuss different approaches for further improvement of our proposed architecture.

Algorithm Recommendation for Data Streams

Jáder Martins Camboim De Sá, Andre Luis Debiaso Rossi, Gustavo Enrique De Almeida Prado Alves Batista, Luís Paulo Faina Garcia

Responsive image

Auto-TLDR; Meta-Learning for Algorithm Selection in Time-Changing Data Streams

Slides Poster Similar

In the last decades, many companies are taking advantage of massive data generation at high frequencies through knowledge discovery to identify valuable information. Machine learning techniques can be employed for knowledge discovery, since they are able to extract patterns from data and induce models to predict future events. However, dynamic and evolving environments generate streams of data that usually are non-stationary. Models induced in these scenarios may perish over time due to seasonality or concept drift. The periodic retraining could help but the fixed algorithm's hypothesis space could no longer be appropriate. An alternative solution is to use meta-learning for periodic algorithm selection in time-changing environments, choosing the bias that best suits the current data. In this paper, we present an enhanced framework for data streams algorithm selection based on MetaStream. Our approach uses meta-learning and incremental learning to actively select the best algorithm for the current concept in a time-changing. Different from previous works, a set of cutting edge meta-features and an incremental learning approach in the meta-level based on LightGBM are used. The results show that this new strategy can improve the recommendation of the best algorithm more accurately in time-changing data.

Matching of Matching-Graphs – a Novel Approach for Graph Classification

Mathias Fuchs, Kaspar Riesen

Responsive image

Auto-TLDR; Stable Graph Matching Information for Pattern Recognition

Slides Poster Similar

Due to fast developments in data acquisition, we observe rapidly increasing amounts of data available in diverse areas. Simultaneously, we observe that in many applications the underlying data is inherently complex, making graphs a very useful and adequate data structure for formal representation. A large amount of graph based methods for pattern recognition have been proposed. Many of these methods actually rely on graph matching. In the present paper a novel encoding of graph matching information is proposed. The idea of this encoding is to formalize the stable cores of specific classes by means of graphs. In an empirical evaluation we show that it can be highly beneficial to focus on these stable parts of graphs during graph classification.

Force Banner for the Recognition of Spatial Relations

Robin Deléarde, Camille Kurtz, Laurent Wendling, Philippe Dejean

Responsive image

Auto-TLDR; Spatial Relation Recognition using Force Banners

Slides Similar

Studying the spatial organization of objects in images is fundamental to increase both the understanding of the sensed scene and the accuracy of the perceived similarity between images. This often leads to the problem of spatial relation recognition: given two objects depicted in an image, what is their spatial relation? In this article, we consider this as a classification problem. Instead of considering directly the original image space (or imaging features) to predict the spatial relation, we propose a novel intermediate representation (called Force Banner) modeling rich spatial information between pairs of objects composing a scene. Such a representation captures the relative position between objects using a panel of forces (attraction and repulsion), that take into account the structural shapes of the objects and their distance in a directional fashion. Force Banners are used to feed a classical 2D Convolutional Neural Network (CNN) for the recognition of spatial relations, benefiting from pre-trained models and fine-tuning. Experimental results obtained on a dataset of images with various shapes highlight the interest of this approach, and in particular its benefit to describe spatial information.

Soft Label and Discriminant Embedding Estimation for Semi-Supervised Classification

Fadi Dornaika, Abdullah Baradaaji, Youssof El Traboulsi

Responsive image

Auto-TLDR; Semi-supervised Semi-Supervised Learning for Linear Feature Extraction and Label Propagation

Slides Poster Similar

In recent times, graph-based semi-supervised learning proved to be a powerful paradigm for processing and mining large datasets. The main advantage relies on the fact that these methods can be useful in propagating a small set of known labels to a large set of unlabeled data. The scarcity of labeled data may affect the performance of the semi-learning. This paper introduces a new semi-supervised framework for simultaneous linear feature extraction and label propagation. The proposed method simultaneously estimates a discriminant transformation and the unknown label by exploiting both labeled and unlabeled data. In addition, the unknowns of the learning model are estimated by integrating two types of graph-based smoothness constraints. The resulting semi-supervised model is expected to learn more discriminative information. Experiments are conducted on six public image datasets. These experimental results show that the performance of the proposed method can be better than that of many state-of-the-art graph-based semi-supervised algorithms.

Memetic Evolution of Training Sets with Adaptive Radial Basis Kernels for Support Vector Machines

Jakub Nalepa, Wojciech Dudzik, Michal Kawulok

Responsive image

Auto-TLDR; Memetic Algorithm for Evolving Support Vector Machines with Adaptive Kernels

Slides Poster Similar

Support vector machines (SVMs) are a supervised learning technique that can be applied in both binary and multi-class classification and regression tasks. SVMs seamlessly handle continuous and categorical variables. Their training is, however, both time- and memory-costly for large training data, and selecting an incorrect kernel function or its hyperparameters leads to suboptimal decision hyperplanes. In this paper, we introduce a memetic algorithm for evolving SVM training sets with adaptive radial basis function kernels to not only make the deployment of SVMs easier for emerging big data applications, but also to improve their generalization abilities over the unseen data. We build upon two observations: first, only a small subset of all training vectors, called the support vectors, contribute to the position of the decision boundary, hence the other vectors can be removed from the training set without deteriorating the performance of the model. Second, selecting different kernel hyperparameters for different training vectors may help better reflect the subtle characteristics of the space while determining the hyperplane. The experiments over almost 100 benchmark and synthetic sets showed that our algorithm delivers models outperforming both SVMs optimized using state-of-the-art evolutionary techniques, and other supervised learners.

Nonlinear Ranking Loss on Riemannian Potato Embedding

Byung Hyung Kim, Yoonje Suh, Honggu Lee, Sungho Jo

Responsive image

Auto-TLDR; Riemannian Potato for Rank-based Metric Learning

Slides Poster Similar

We propose a rank-based metric learning method by leveraging a concept of the Riemannian Potato for better separating non-linear data. By exploring the geometric properties of Riemannian manifolds, the proposed loss function optimizes the measure of dispersion using the distribution of Riemannian distances between a reference sample and neighbors and builds a ranked list according to the similarities. We show the proposed function can learn a hypersphere for each class, preserving the similarity structure inside it on Riemannian manifold. As a result, compared with Euclidean distance-based metric, our method can further jointly reduce the intra-class distances and enlarge the inter-class distances for learned features, consistently outperforming state-of-the-art methods on three widely used non-linear datasets.

The eXPose Approach to Crosslier Detection

Antonio Barata, Frank Takes, Hendrik Van Den Herik, Cor Veenman

Responsive image

Auto-TLDR; EXPose: Crosslier Detection Based on Supervised Category Modeling

Slides Poster Similar

Transit of wasteful materials within the European Union is highly regulated through a system of permits. Waste processing costs vary greatly depending on the waste category of a permit. Therefore, companies may have a financial incentive to allege transporting waste with erroneous categorisation. Our goal is to assist inspectors in selecting potentially manipulated permits for further investigation, making their task more effective and efficient. Due to data limitations, a supervised learning approach based on historical cases is not possible. Standard unsupervised approaches, such as outlier detection and data quality-assurance techniques, are not suited since we are interested in targeting non-random modifications in both category and category-correlated features. For this purpose we (1) introduce the concept of crosslier: an anomalous instance of a category which lies across other categories; (2) propose eXPose: a novel approach to crosslier detection based on supervised category modelling; and (3) present the crosslier diagram: a visualisation tool specifically designed for domain experts to easily assess crossliers. We compare eXPose against traditional outlier detection methods in various benchmark datasets with synthetic crossliers and show the superior performance of our method in targeting these instances.

Weakly Supervised Learning through Rank-Based Contextual Measures

João Gabriel Camacho Presotto, Lucas Pascotti Valem, Nikolas Gomes De Sá, Daniel Carlos Guimaraes Pedronette, Joao Paulo Papa

Responsive image

Auto-TLDR; Exploiting Unlabeled Data for Weakly Supervised Classification of Multimedia Data

Slides Poster Similar

Machine learning approaches have achieved remarkable advances over the last decades, especially in supervised learning tasks such as classification. Meanwhile, multimedia data and applications experienced an explosive growth, becoming ubiquitous in diverse domains. Due to the huge increase in multimedia data collections and the lack of labeled data in several scenarios, creating methods capable of exploiting the unlabeled data and operating under weakly supervision is imperative. In this work, we propose a rank-based model to exploit contextual information encoded in the unlabeled data in order to perform weakly supervised classification. We employ different rank-based correlation measures for identifying strong similarities relationships and expanding the labeled set in an unsupervised way. Subsequently, the extended labeled set is used by a classifier to achieve better accuracy results. The proposed weakly supervised approach was evaluated on multimedia classification tasks, considering several combinations of rank correlation measures and classifiers. An experimental evaluation was conducted on 4 public image datasets and different features. Very positive gains were achieved in comparison with various semi-supervised and supervised classifiers taken as baselines when considering the same amount of labeled data.

Feature Extraction and Selection Via Robust Discriminant Analysis and Class Sparsity

Ahmad Khoder, Fadi Dornaika

Responsive image

Auto-TLDR; Hybrid Linear Discriminant Embedding for supervised multi-class classification

Slides Poster Similar

The main goal of discriminant embedding is to extract features that can be compact and informative representations of the original set of features. This paper introduces a hybrid scheme for linear feature extraction for supervised multi-class classification. We introduce a unifying criterion that is able to retain the advantages of robust sparse LDA and Inter-class sparsity. Thus, the estimated transformation includes two types of discrimination which are the inter-class sparsity and robust Linear Discriminant Analysis with feature selection. In order to optimize the proposed objective function, we deploy an iterative alternating minimization scheme for estimating the linear transformation and the orthogonal matrix. The introduced scheme is generic in the sense that it can be used for combining and tuning many other linear embedding methods. In the lights of the experiments conducted on six image datasets including faces, objects, and digits, the proposed scheme was able to outperform competing methods in most of the cases.

PIF: Anomaly detection via preference embedding

Filippo Leveni, Luca Magri, Giacomo Boracchi, Cesare Alippi

Responsive image

Auto-TLDR; PIF: Anomaly Detection with Preference Embedding for Structured Patterns

Slides Poster Similar

We address the problem of detecting anomalies with respect to structured patterns. To this end, we conceive a novel anomaly detection method called PIF, that combines the advantages of adaptive isolation methods with the flexibility of preference embedding. Specifically, we propose to embed the data in a high dimensional space where an efficient tree-based method, PI-FOREST, is employed to compute an anomaly score. Experiments on synthetic and real datasets demonstrate that PIF favorably compares with state-of-the-art anomaly detection techniques, and confirm that PI-FOREST is better at measuring arbitrary distances and isolate points in the preference space.

Sketch-Based Community Detection Via Representative Node Sampling

Mahlagha Sedghi, Andre Beckus, George Atia

Responsive image

Auto-TLDR; Sketch-based Clustering of Community Detection Using a Small Sketch

Slides Poster Similar

This paper proposes a sketch-based approach to the community detection problem which clusters the full graph through the use of an informative and concise sketch. The reduced sketch is built through an effective sampling approach which selects few nodes that best represent the complete graph and operates on a pairwise node similarity measure based on the average commute time. After sampling, the proposed algorithm clusters the nodes in the sketch, and then infers the cluster membership of the remaining nodes in the full graph based on their aggregate similarity to nodes in the partitioned sketch. By sampling nodes with strong representation power, our approach can improve the success rates over full graph clustering. In challenging cases with large node degree variation, our approach not only maintains competitive accuracy with full graph clustering despite using a small sketch, but also outperforms existing sampling methods. The use of a small sketch allows considerable storage savings, and computational and timing improvements for further analysis such as clustering and visualization. We provide numerical results on synthetic data based on the homogeneous, heterogeneous and degree corrected versions of the stochastic block model, as well as experimental results on real-world data.

Partial Monotone Dependence

Denis Khryashchev, Huy Vo, Robert Haralick

Responsive image

Auto-TLDR; Partially Monotone Autoregressive Correlation for Time Series Forecasting

Slides Similar

We present a new measure of dependence suitable for time series forecasting: Partially Monotone Correlation (PMC) that generalizes Monotone Correlation. Unlike Monotone Correlation, the new measure of dependence uses piece-wise strictly monotone transformations that increase the value of the correlation coefficient. We explore its properties, its relationship with Monotone and Maximal Correlation, and present an algorithm that calculates it based on the Simultaneous Perturbation Stochastic Approximation method. We also demonstrate how to apply Partially Monotone Correlation for time series analysis and forecasting introducing Partially Monotone Autoregressive model (PMAR) of order 1. Its performance is then evaluated against the baseline of linear and non-linear autoregressive models (AR, LSTAR) on 150 time series produced from 3 datasets: Yellow Taxi pickups, Citi Bike pickups, and Cellular Network hits. Overall, PMAR model outperforms the baseline with the average sMAPE of about 1.7-4% lower.

Trainable Spectrally Initializable Matrix Transformations in Convolutional Neural Networks

Michele Alberti, Angela Botros, Schuetz Narayan, Rolf Ingold, Marcus Liwicki, Mathias Seuret

Responsive image

Auto-TLDR; Trainable and Spectrally Initializable Matrix Transformations for Neural Networks

Slides Poster Similar

In this work, we introduce a new architectural component to Neural Networks (NN), i.e., trainable and spectrally initializable matrix transformations on feature maps. While previous literature has already demonstrated the possibility of adding static spectral transformations as feature processors, our focus is on more general trainable transforms. We study the transforms in various architectural configurations on four datasets of different nature: from medical (ColorectalHist, HAM10000) and natural (Flowers) images to historical documents (CB55). With rigorous experiments that control for the number of parameters and randomness, we show that networks utilizing the introduced matrix transformations outperform vanilla neural networks. The observed accuracy increases appreciably across all datasets. In addition, we show that the benefit of spectral initialization leads to significantly faster convergence, as opposed to randomly initialized matrix transformations. The transformations are implemented as auto-differentiable PyTorch modules that can be incorporated into any neural network architecture. The entire code base is open-source.

An Efficient Empirical Solver for Localized Multiple Kernel Learning Via DNNs

Ziming Zhang

Responsive image

Auto-TLDR; Localized Multiple Kernel Learning using LMKL-Net

Slides Poster Similar

In this paper we propose solving localized multiple kernel learning (LMKL) using LMKL-Net, a feedforward deep neural network (DNN). In contrast to previous works, as a learning principle we propose parameterizing the gating function for learning kernel combination weights and the multiclass classifier using an attentional network (AN) and a multilayer perceptron (MLP), respectively. Such interpretability helps us better understand how the network solves the problem. Thanks to stochastic gradient descent (SGD), our approach has {\em linear} computational complexity in training. Empirically on benchmark datasets we demonstrate that with comparable or better accuracy than the state-of-the-art, our LMKL-Net can be trained about {\bf two orders of magnitude} faster with about {\bf two orders of magnitude} smaller memory footprint for large-scale learning.

Appliance Identification Using a Histogram Post-Processing of 2D Local Binary Patterns for Smart Grid Applications

Yassine Himeur, Abdullah Alsalemi, Faycal Bensaali, Abbes Amira

Responsive image

Auto-TLDR; LBP-BEVM based Local Binary Patterns for Appliances Identification in the Smart Grid

Similar

Identifying domestic appliances in the smart grid leads to a better power usage management and further helps in detecting appliance-level abnormalities. An efficient identification can be achieved only if a robust feature extraction scheme is developed with a high ability to discriminate between different appliances on the smart grid. Accordingly, we propose in this paper a novel method to extract electrical power signatures after transforming the power signal to 2D space, which has more encoding possibilities. Following, an improved local binary patterns (LBP) is proposed that relies on improving the discriminative ability of conventional LBP using a post-processing stage. A binarized eigenvalue map (BEVM) is extracted from the 2D power matrix and then used to post-process the generated LBP representation. Next, two histograms are constructed, namely up and down histograms, and are then concatenated to form the global histogram. A comprehensive performance evaluation is performed on two different datasets, namely the GREEND and WITHED, in which power data were collected at 1 Hz and 44000 Hz sampling rates, respectively. The obtained results revealed the superiority of the proposed LBP-BEVM based system in terms of the identification performance versus other 2D descriptors and existing identification frameworks.

Automatically Mining Relevant Variable Interactions Via Sparse Bayesian Learning

Ryoichiro Yafune, Daisuke Sakuma, Yasuo Tabei, Noritaka Saito, Hiroto Saigo

Responsive image

Auto-TLDR; Sparse Bayes for Interpretable Non-linear Prediction

Slides Poster Similar

With the rapid increase in the availability of large amount of data, prediction is becoming increasingly popular, and has widespread through our daily life. However, powerful non- linear prediction methods such as deep learning and SVM suffer from interpretability problem, making it hard to use in domains where the reason for decision making is required. In this paper, we develop an interpretable non-linear model called itemset Sparse Bayes (iSB), which builds a Bayesian probabilistic model, while simultaneously considering variable interactions. In order to suppress the resulting large number of variables, sparsity is imposed on regression weights by a sparsity inducing prior. As a subroutine to search for variable interactions, itemset enumeration algorithm is employed with a novel bounding condition. In computational experiments using real-world dataset, the proposed method performed better than decision tree by 10% in terms of r-squared . We also demonstrated the advantage of our method in Bayesian optimization setting, in which the proposed approach could successfully find the maximum of an unknown function faster than Gaussian process. The interpretability of iSB is naturally inherited to Bayesian optimization, thereby gives us a clue to understand which variables interactions are important in optimizing an unknown function.

Anticipating Activity from Multimodal Signals

Tiziana Rotondo, Giovanni Maria Farinella, Davide Giacalone, Sebastiano Mauro Strano, Valeria Tomaselli, Sebastiano Battiato

Responsive image

Auto-TLDR; Exploiting Multimodal Signal Embedding Space for Multi-Action Prediction

Slides Poster Similar

Images, videos, audio signals, sensor data, can be easily collected in huge quantity by different devices and processed in order to emulate the human capability of elaborating a variety of different stimuli. Are multimodal signals useful to understand and anticipate human actions if acquired from the user viewpoint? This paper proposes to build an embedding space where inputs of different nature, but semantically correlated, are projected in a new representation space and properly exploited to anticipate the future user activity. To this purpose, we built a new multimodal dataset comprising video, audio, tri-axial acceleration, angular velocity, tri-axial magnetic field, pressure and temperature. To benchmark the proposed multimodal anticipation challenge, we consider classic classifiers on top of deep learning methods used to build the embedding space representing multimodal signals. The achieved results show that the exploitation of different modalities is useful to improve the anticipation of the future activity.

3D Facial Matching by Spiral Convolutional Metric Learning and a Biometric Fusion-Net of Demographic Properties

Soha Sadat Mahdi, Nele Nauwelaers, Philip Joris, Giorgos Bouritsas, Imperial London, Sergiy Bokhnyak, Susan Walsh, Mark Shriver, Michael Bronstein, Peter Claes

Responsive image

Auto-TLDR; Multi-biometric Fusion for Biometric Verification using 3D Facial Mesures

Slides Similar

Face recognition is a widely accepted biometric verification tool, as the face contains a lot of information about the identity of a person. In this study, a 2-step neural-based pipeline is presented for matching 3D facial shape to multiple DNA-related properties (sex, age, BMI and genomic background). The first step consists of a triplet loss-based metric learner that compresses facial shape into a lower dimensional embedding while preserving information about the property of interest. Most studies in the field of metric learning have only focused on Euclidean data. In this work, geometric deep learning is employed to learn directly from 3D facial meshes. To this end, spiral convolutions are used along with a novel mesh-sampling scheme that retains uniformly sampled 3D points at different levels of resolution. The second step is a multi-biometric fusion by a fully connected neural network. The network takes an ensemble of embeddings and property labels as input and returns genuine and imposter scores. Since embeddings are accepted as an input, there is no need to train classifiers for the different properties and available data can be used more efficiently. Results obtained by a 10-fold cross-validation for biometric verification show that combining multiple properties leads to stronger biometric systems. Furthermore, the proposed neural-based pipeline outperforms a linear baseline, which consists of principal component analysis, followed by classification with linear support vector machines and a Naïve Bayes-based score-fuser.

Fractional Adaptation of Activation Functions in Neural Networks

Julio Zamora Esquivel, Jesus Adan Cruz Vargas, Paulo Lopez-Meyer, Hector Alfonso Cordourier Maruri, Jose Rodrigo Camacho Perez, Omesh Tickoo

Responsive image

Auto-TLDR; Automatic Selection of Activation Functions in Neural Networks using Fractional Calculus

Slides Poster Similar

In this work, we introduce a generalization methodology for the automatic selection of the activation functions inside a neural network, taking advantage of concepts defined in fractional calculus. This methodology enables the neural network to search and optimize its own activation functions during the training process, by defining the fractional order of the derivative of a given primitive activation function. This fractional order is tuned as an additional training hyper-parameter a for intrafamily selection and b for cross family selection. By following this approach, the neurons inside the network can adjust their activation functions, e.g. from MLP to RBF networks, to best fit the input data, and reduce the output error. The experimental results obtained show the benefits of using this technique implemented on a ResNet18 topology, by outperforming the accuracy of a ResNet100 trained with CIFAR10 and Improving 1% ImageNet reported in the literature.

A Heuristic-Based Decision Tree for Connected Components Labeling of 3D Volumes

Maximilian Söchting, Stefano Allegretti, Federico Bolelli, Costantino Grana

Responsive image

Auto-TLDR; Entropy Partitioning Decision Tree for Connected Components Labeling

Slides Poster Similar

Connected Components Labeling represents a fundamental step for many Computer Vision and Image Processing pipelines. Since the first appearance of the task in the sixties, many algorithmic solutions to optimize the computational load needed to label an image have been proposed. Among them, block-based scan approaches and decision trees revealed to be some of the most valuable strategies. However, due to the cost of the manual construction of optimal decision trees and the computational limitations of automatic strategies employed in the past, the application of blocks and decision trees has been restricted to small masks, and thus to 2D algorithms. With this paper we present a novel heuristic algorithm based on decision tree learning methodology, called Entropy Partitioning Decision Tree (EPDT). It allows to compute near-optimal decision trees for large scan masks. Experimental results demonstrate that algorithms based on the generated decision trees outperform state-of-the-art competitors.

Automatic Tuberculosis Detection Using Chest X-Ray Analysis with Position Enhanced Structural Information

Hermann Jepdjio Nkouanga, Szilard Vajda

Responsive image

Auto-TLDR; Automatic Chest X-ray Screening for Tuberculosis in Rural Population using Localized Region on Interest

Slides Poster Similar

For Tuberculosis (TB) detection beside the more expensive diagnosis solutions such as culture or sputum smear analysis one could consider the automatic analysis of the chest X-ray (CXR). This could mimic the lung region reading by the radiologist and it could provide a cheap solution to analyze and diagnose pulmonary abnormalities such as TB which often co- occurs with HIV. This software based pulmonary screening can be a reliable and affordable solution for rural population in different parts of the world such as India, Africa, etc. Our fully automatic system is processing the incoming CXR image by applying image processing techniques to detect the region on interest (ROI) followed by a computationally cheap feature extraction involving edge detection using Laplacian of Gaussian which we enrich by counting the local distribution of the intensities. The choice to ”zoom in” the ROI and look for abnormalities locally is motivated by the fact that some pulmonary abnormalities are localized in specific regions of the lungs. Later on the classifiers can decide about the normal or abnormal nature of each lung X-ray. Our goal is to find a simple feature, instead of a combination of several ones, -proposed and promoted in recent years’ literature, which can properly describe the different pathological alterations in the lungs. Our experiments report results on two publicly available data collections1, namely the Shenzhen and the Montgomery collection. For performance evaluation, measures such as area under the curve (AUC), and accuracy (ACC) were considered, achieving AUC = 0.81 (ACC = 83.33%) and AUC = 0.96 (ACC = 96.35%) for the Montgomery and Schenzen collections, respectively. Several comparisons are also provided to other state- of-the-art systems reported recently in the field.

Textual-Content Based Classification of Bundles of Untranscribed of Manuscript Images

José Ramón Prieto Fontcuberta, Enrique Vidal, Vicente Bosch, Carlos Alonso, Carmen Orcero, Lourdes Márquez

Responsive image

Auto-TLDR; Probabilistic Indexing for Text-based Classification of Manuscripts

Slides Poster Similar

Content-based classification of manuscripts is an important task that is generally performed in archives and libraries by experts with a wealth of knowledge on the manuscripts contents. Unfortunately, many manuscript collections are so vast that it is not feasible to rely solely on experts to perform this task. Current approaches for textual-content-based manuscript classification generally require the handwritten images to be first transcribed into text -- but achieving sufficiently accurate transcripts is generally unfeasible for large sets of historical manuscripts. We propose a new approach to automatically perform this classification task which does not rely on any explicit image transcripts. It is based on ``probabilistic indexing'', a relatively novel technology which allows to effectively represent the intrinsic word-level uncertainty generally exhibited by handwritten text images. We assess the performance of this approach on a large collection of complex manuscripts from the Spanish Archivo General de Indias, with promising results.

Wasserstein k-Means with Sparse Simplex Projection

Takumi Fukunaga, Hiroyuki Kasai

Responsive image

Auto-TLDR; SSPW $k$-means: Sparse Simplex Projection-based Wasserstein $ k$-Means Algorithm

Slides Poster Similar

This paper presents a proposal of a faster Wasserstein $k$-means algorithm for histogram data by reducing Wasserstein distance computations exploiting sparse simplex projection. We shrink data samples, centroids and ground cost matrix, which enables significant reduction of the computations to solve optimal transport problems without loss of clustering quality. Furthermore, we dynamically reduce computational complexity by removing lower-valued data samples harnessing sparse simplex projection while keeping degradation of clustering quality lower. We designate this proposed algorithm as sparse simplex projection-based Wasserstein $k$-means, for short, SSPW $k$-means. Numerical evaluations against Wasserstein $k$-means algorithm demonstrate the effectiveness of the proposed SSPW $k$-means on real-world datasets.

Exploring Seismocardiogram Biometrics with Wavelet Transform

Po-Ya Hsu, Po-Han Hsu, Hsin-Li Liu

Responsive image

Auto-TLDR; Seismocardiogram Biometric Matching Using Wavelet Transform and Deep Learning Models

Slides Poster Similar

Seismocardiogram (SCG) has become easily accessible in the past decade owing to the advance of sensor technology. However, SCG biometric has not been widely explored. In this paper, we propose combining wavelet transform together with deep learning models, machine learning classifiers, or structural similarity metric to perform SCG biometric matching tasks. We validate the proposed methods on the publicly available dataset from PhysioNet database. The dataset contains one hour long electrocardiogram, breathing, and SCG data of 20 subjects. We train the models on the first five minute SCG and conduct identification on the last five minute SCG. We evaluate the identification and authentication performance with recognition rate and equal error rate, respectively. Based on the results, we show that wavelet transformed SCG biometric can achieve state-of-the-art performance when combined with deep learning models, machine learning classifiers, or structural similarity.

Compression Strategies and Space-Conscious Representations for Deep Neural Networks

Giosuè Marinò, Gregorio Ghidoli, Marco Frasca, Dario Malchiodi

Responsive image

Auto-TLDR; Compression of Large Convolutional Neural Networks by Weight Pruning and Quantization

Slides Poster Similar

Recent advances in deep learning have made available large, powerful convolutional neural networks (CNN) with state-of-the-art performance in several real-world applications. Unfortunately, these large-sized models have millions of parameters, thus they are not deployable on resource-limited platforms (e.g. where RAM is limited). Compression of CNNs thereby becomes a critical problem to achieve memory-efficient and possibly computationally faster model representations. In this paper, we investigate the impact of lossy compression of CNNs by weight pruning and quantization, and lossless weight matrix representations based on source coding. We tested several combinations of these techniques on four benchmark datasets for classification and regression problems, achieving compression rates up to 165 times, while preserving or improving the model performance.

Position-Aware Safe Boundary Interpolation Oversampling

Yongxu Liu, Yan Liu

Responsive image

Auto-TLDR; PABIO: Position-Aware Safe Boundary Interpolation-Based Oversampling for Imbalanced Data

Slides Poster Similar

The class imbalance problem is characterized by the unequal distribution of different class samples, usually resulting in a learning bias toward the majority class. In the past decades, kinds of techniques have been proposed to alleviate this problem. Among those approaches, one promising method, interpolation- based oversampling, proposes to generate synthetic minority samples based on selected reference data, which can effectively solve the skewed distribution of data samples. However, there are several unsolved issues in interpolation-based oversampling. Existing methods often suffer from noisy synthetic samples due to improper data clusterings and unsatisfactory reference selection. In this paper, we propose the position-aware safe boundary interpolation oversampling algorithm (PABIO) to address such issues. We firstly introduce a combined clustering algorithm for minority samples to overcome the shortage of clustering using only distance-based or density-based. Then a position- aware interpolation-based oversampling algorithm is proposed for different minority clusters. Especially, we develop a novel method to leverage the majority class information to learn a safe boundary for generating synthetic points. The proposed PABIO is evaluated on multiple imbalanced data sets classified by two base classifiers: support vector machine (SVM) and C4.5 decision tree classifier. Experimental results show that our proposed PABIO outperforms other baselines among benchmark data sets.

Learning Embeddings for Image Clustering: An Empirical Study of Triplet Loss Approaches

Kalun Ho, Janis Keuper, Franz-Josef Pfreundt, Margret Keuper

Responsive image

Auto-TLDR; Clustering Objectives for K-means and Correlation Clustering Using Triplet Loss

Slides Poster Similar

In this work, we evaluate two different image clustering objectives, k-means clustering and correlation clustering, in the context of Triplet Loss induced feature space embeddings. Specifically, we train a convolutional neural network to learn discriminative features by optimizing two popular versions of the Triplet Loss in order to study their clustering properties under the assumption of noisy labels. Additionally, we propose a new, simple Triplet Loss formulation, which shows desirable properties with respect to formal clustering objectives and outperforms the existing methods. We evaluate all three Triplet loss formulations for K-means and correlation clustering on the CIFAR-10 image classification dataset.